You are here:      Home  >  Products - T58-8F Turbojet mounting blocks

T58-8F Turbojet mounting blocks:

A set of three front mounting blocks and two rear mounting plates are required. Front mounting blocks are machined from solid billet 316 Stainless Steel. Rear mounting plates are laser cut from 316 Stainless sheet and are 3/16 thick. The rear mounting plates are custom drilled to match the engine mount to the power turbine casing.

Top, right, and left mounting blocks allow rigid mounting of engine inlet casing to engine mount

Left and Right rear mount plates are held onto the power turbine/nozzle flange by four bolts. The position of the bolts is determined after the front mount is attached, in order to determine correct engine alignment.